Maiqiang two components epoxy resin primer

Excellent corrosion resistance Conformable to irregular pipe First protection layer of pipe

Product description

The Epoxy Primer is a two component, solvent free, proprietary formulation. The components are mixed prior to application in the field. The resultant coating forms the first layer of corrosion protection, in a 3 Layer system. The primer should be applied on the pre-heated bare steel surface, as well as the line coating where the sleeve will be shrunk. The resultant film ensures superior corrosion protection.

Features

Excellent corrosion resistance

Several colors available such as black, gray, green and red

Conformable to irregular pipe

Compatible with general coating system

Technical data

Properties	Unit	Value
Specific Gravity (A)	g/cm3	1.41
Specific Gravity (B)	g/cm3	0.95
Volume of Solids	%	99.6
Weight of Solids	%	99.5
Mixing Ratio (by weight)	--	100:37--44
Coating thickness	Microns	200
Pot Life @ 23ºC	minutes	≥10
Shelf Life @ 23ºC	years	1
Color	--	black, gray, green and others

Ordering information

Primer is normally supplied in kit form, consisting of pre-measured quantities of Base & Cure packed separately, along with small tools like mixing stick, protective gloves and application pad. Please mention the pipe size for ordering the kits. Primer can be supplied in bulk form against special request.

Application guide

Pipe Size		Pipe OD  (mm)	Primer Quantity
			Part A(Base) (gms)	Part B(Cure) (gms)
DN	Inch
100	4	114	44	19
125	5	141	55	24
150	6	168	65	28
200	8	219	84	37
250	10	273	105	46
300	12	324	125	55
350	14	356	137	60
400	16	406	157	69
450	18	457	176	77
500	20	508	196	86
600	24	610	235	103
700	28	711	273	120
800	32	813	313	138
900	36	914	352	154
1000	40	1016	391	172
1100	44	1120	431	189
1200	48	1220	469	203
1400	56	1420	546	240
1500	60	1520	585	257

Note: Above quantities are for a 450mm wide sleeve. For other sleeve widths, quantity of primer can be calculated proportionately.

Maiqiang two components epoxy resin primer