Alu Flashing Tape (Maiqiang T-600)

Easy application Superior adhesion capabilities Excellent sealing performance Highly conformable and flexible

DESCRIPTION

Aluminum Foil Tape, Flashing Tape, Peel/Stick Roof Tape, Alu Bitumen tape, Alu waterproof tape, Sealing tape has a heavy aluminum facing together with an extra thick rubberized asphalt based adhesive system.

A cold applied self adhesive aluminum backing flashing in tape form.

The product is made from substrate of aluminum foil, which has unique capability to reflect sunlight and anti-UV as well as flexibility and surface smoothness, and butyl rubber modified asphalt adhesive of high anticorrosive and adhesion. Therefore, the aluminum foil anticorrosion tape is Waterproof, anti-aging, non-curing, non-cracking, without moving and peeling for a long term, so that the anticorrosion capability is strong and the appearance is good. It has been proved that the product is excellent for anticorrosion.

USES

-Maiqiang T-700 series is recommended for most types of roofs, windows and flashing problems including:

-Trailers

-RV’S

-Mobile homes

-Industrial buildings

-Roof awnings

-Truck trailers

-Chimney Flashing

-Roof to wall flashing

-Ridge Flashing

-Window frames of glass, metal, plastic

-Wood including OSB

-Clay and Cement Roof Tiles

COMPOSITION

High melting point polymer bitumen adhesive laminated to a 30-70 micron aluminum. The adhesive surface is protected by a release coated plastics film which is discarded during use.

Properties	TYPICAL VALUES	UNIT
Carrier film	Aluminum surfaced HDPE of Pure Aluminum
Adhesive	Rubberized asphalt
Release Liner	Antiadhesive Film Treaded with Silicone
Adhesion	30	N/cm
Breaking Strength	40	N/cm
Moisture absorption	0.02	%
Temperature range       For application       For maximum service	5 to 50 93	ºC
Tensile Strength	11.0 0.2	b/in kg/mm
UV resistance	Excellent	--
Roll of     Thickness	0.8mm, 1.0mm, 1.2mm, 1.27mm, 1.4mm, 1.5mm, 1.65mm, 2.0mm
Width	5cm, 7.5cm, 10cm, 15cm, 20cm, 30cm, 40cm, 50cm, …80cm
Length	50m, 20m, 15m, 10m, 5m
RECOMMENDED PRIMER	Flashing Tape Primer

 

USAGE

Surface treatment: clear the rust, welding spatter, burr, oil, dirt, and dry it. Class St3 should be reached for manual rust removal, while class St2 in SYJ4007-86 should be reached for mechanical rust removal.

Apply the primer: an exclusive primer should be used, and the use should be away from fire source. Stir it until it is even, use clean brush, roller or other mechanical means to paint it evenly. Amount of primer to be used: for manual painting: 12/L, for mechanical painting: 20/L

The winding may be performed 5-10 minutes after surface drying of primer.

Temperature for use: —5ºC--+50ºC.

 

TRANSPORTATION AND STORAGE

Avoid exposure to the sun and rain, and prevent freezing by heat preservation. Prevent crush and deformation. Do not be close to heat and open flame.

Temperature for transportation and storage: -20ºC--+35ºC.

Storage period: 6 months

FEATURES

Easy application-Installations fast and easy—simply remove the release film and press onto the substrate.

Superior adhesion capabilities-Creates a strong bond to the substrate for long-lasting waterproofing protection.

Excellent sealing performance-The specially formulated rubberized asphalt adhesive seals around fasteners, allowing no water to penetrate and get to the substrate.

Highly conformable and flexible–Can accommodate settlement and shrinkage movement.

Long-lasting waterproofing protection-Both the aluminum surfaced polyethylene film and pure alu surface with the specially-formulated rubberized asphalt components create a water and moisture barrier that does not degrade from the effects of the environment.

Alu Flashing Tape (Maiqiang T-600)